Product Details:

For 3/8" or 1/2" (10 or 12 mm) Glass


This CRL Transom Mounted Patch Connector with Support Fin Bracket is used on one or two lite transoms that require additional lateral support to achieve the desired structural strength. The support fin glass should be sized to approved design criteria (refer to GANA or Manufacturer's Manual), and secured to the ceiling with a PH92 Ceiling Mounted Support Fin Bracket.


Color: Aluminum
Minimum Order: 1 Each

Additional Product Information:
GLASS FABRICATION REQUIRED: Four 3/4 inch (19 millimeter) Diameter Holes.