Product Details:

Excellent Primerless Adhesion to Most Common Construction Substrates
±50% Joint Width Movement
Long Tooling Time, All Temperature Gunning, Plus Each Tube Has an Innovative Screw-On Nozzle

CRL 95C Silicone is a one part, low modulus, neutral cure formulation that cures to a durable and flexible silicone rubber building joint seal. It can accommodate ±50 percent joint movement in properly designed joints. Designed for sealing expansion and control joints in precast concrete panels and metal curtainwalls; non-structural glazing of glass, metal and plastic, as well as waterproofing applications, including perimeter sealing of doors and windows. CRL 95C forms a durable, flexible watertight bond with most building materials in any combination of glass, ceramics, plastics, stone, masonry, wood, steel, anodized and mill-finished aluminum, and painted surfaces. In most cases, no primer is required. CRL 95C is compatible with all laminated glass, insulating glass units, and acrylic or polycarbonate glazing sheets. CRL 95C can be used as a weather seal for insulating glass units produced with any type of sealant, including two-part silicones, polysulfides, polyurethane and butyls. CRL 95C can be applied at outdoor temperatures as low as -20°F (-29°C), provided that surfaces are clean, dry and frost-free or on surfaces as high as 100°F (38°C). Cured sealant will perform at cold temperatures down to -40°F (-40°C) or at high temperatures up to 350°F (177°C).
In order to help you better select the correct sealant, we have put together a  Silicone and Sealant Selector Chart  

Color:                         Precast White
Contents of Cartridge : 10.3 fl oz (305 ml)

Minimum Order: 1 Each

    

Technical Data: CRL 95C meets or exceeds the requirements of the following specifications: TT-S-001543A (COM-NBS) for silicone building sealants Class A; TT-S-00230C (COM-NBS) for one component building sealants as Class A, Type II; ASTM-C920 Standard Specification for Elastomer Joint Sealants as Type S, Grade NS, Class 50, Use NT, G, A, M, & O; CAN/CGSB-19.13-M87. 95CBL (black) meets all of AAMA 802.3-92 (Type I and II), 805.2-94 (Group C), and 808.3-92.

Comparable Sealants:
Dow Corning® 795, 790, 791 Silicones
Tremco® Spectrem 1, Spectrem 2, Spectrem 3 Silicones
GE® SilPruf 2000, UltraPruf II 2900, SilPruf LM 2700 Silicones
Pecora® 864, 895 Silicones
Sonneborn® OmniSeal Silicone

Warranty: CRL 95C has a 20 year limited warranty. Once applied and thoroughly set up, CRL 95C Silicone Building Sealant is warranted to stay flexible for at least 20 years, when properly applied and used under normal conditions.

Important Note:
CRL 95C should not be used for structural glazing; sealing horizontal decks, patios, driveways or terrace joints where abrasion or physical abuse is encountered; sealing submerged joints; or for exterior or interior sealing below the waterline in marine applications. Do not use CRL 95C in totally confined or air-free spaces, or in designs that will be painted after application of the sealant. Paint film does not stretch with extension of the sealant, and adhesion of paint to the sealant is not adequate. The sealant should be applied after painting is completed. Do not apply to surfaces with special protective or cosmetic coatings without prior consultation of the manufacturer. Neutral cure sealant cure byproducts may cause stress cracking or surface crazing of polycarbonate sheet under certain conditions. Test in application before use. Do not apply to surfaces in direct contact with food. Check cartridge label and Specification Data Sheet for additional limitations.