Home 0  Item(s)  $0.00 View Cart Order Status My Account About Us
HOME » Automotive Products » Automotive Adhesives and Sealants » CRL Automotive Urethanes » CRL Urethane Adhesives
Shop Products
Abrasive and Diamond Belts and Discs
Architectural and Ornamental Systems and Accessories
Automotive Products
CDS Saw Blades and Drill Bits for Concrete and Stone
Cerium Oxide Polishing Powder
Cleaning Products and Lubricants
Closet Doors and Drawer Hardware
Commercial Door and Window Hardware
Construction Sealants, Silicones Sealants, Glazing Tapes, Tools, and Adhesives
Convex, Dome Security and Inspection Mirrors
Corrosion Prevention and Protection
Craft, Hobby and Gift Ideas
Decorative Venetian Art Cast Glass Plates, Platters and Bowls
Displays, Catalogs, Videos, and Manuals
Door Closers and Accessories
Drill Bits for Marble, Granite, Porcelain, and Masonry
European Style Sliding and Pivot Glass Doors and Hardware
Extrusions, Channels, and Moldings
Glass Cabinet and Showcase Hardware
Glass Connectors and Clamps
Glass Shelf Kits, Supports, Clamps and Brackets
Glass, Plastic, Gasket, and Tube Cutting Tools, Fabrication Machinery, and Related Items
Glazing Knives, Points, Clips, Removers and Putty
Hand and Power Tools, Equipment, and Accessories
Makeup Mirrors, Vanity Mirrors, and Lamps
Mirror Frames, Mounting Hardware, Channels, and Supplies
Outlet Covers, Grills, and Accessories
Plastic and Rubber Tubing
Restaurant and Hospitality Products
Safety and Protective Wear and Equipment
Security Hardware
Showcase Assemblies, Parts, and Hardware
Shower and Tub Enclosure Hardware, Kits and Accessories
Showers, Vanities and Shower Columns by Dreamline
Soldering, Welding and Supplies
Standoffs, Display Systems and Hardware
Transaction and Commercial Hardware
UV Lamps, Dispensers, Kits, and Fast Curing Adhesives
Weatherstripping, Edge Seals, Trims and Glazing Vinyls
Window and Door Hardware
Window Film and Solar Screen

CRL/Somaca Hi-Viscosity Auto Glass Urethane Adhesive - 10.1 Fl. Oz. Cartridge

View more and larger images
Part Number: 1217349
Our Price: $12.46
In stock
* To see your shipping charges click "View Cart" after adding your item(s) to the shopping cart.
Prop.65 warning for California residents

Product Details:

24 Page Technician Training Manual

Meets or Exceeds U.S. Federal Motor Vehicle Safety Standards 208 and 212
Value Priced, Fast Curing, Cold Applied

CRL/Somaca Hi-Viscosity Urethane Adhesive is a fast curing adhesive that passes or exceeds U.S. Federal Motor Vehicle Safety Standards FMVSS212 (Barrier Crash Test) and FMVSS208 (Occupant Crash Protection) in its most severe interpretation with dual air bags and unrestrained dummies. The fast curing formula is tack free in only 50 ±10 minutes and offers Safe Drive Away Time in as little as 1-1/2 hours when used on vehicles without a passenger side air bag, 3 hours with passenger air bag at 73°F (23°C) and 45% RH (relative humidity).

Contents: 10.1 Fl Oz (300 ml)
Shelf Life: 9 Months

Minimum Order: 1 Each

Additional Product Information:
Cleaning and Primers
CRL/Somaca Urethanes are supported by a one-step primer and aerosol cleaner formulated for use in all aspects of glass bonding, including the glass frit, pinchweld, and EPDM/PVC moldings.
1. After removing all of the old urethane to within 1/16 inch (1.5 millimeter) of the pinchweld, prepare the pinchweld following the procedures outlined in the CRL Technicians Training Manual. Prime these areas with 1214006 One Step Primer.
2. Clean the inside of the windshield with a lint-free towel 1550 and PWR22 Automotive Glass Cleaner.
3. Apply the same 1214006 One Step Primer to the frit area with a lint-free towel and allow to dry for a minimum of 10 minutes, but no more than 8 hours before installing the adhesive. This procedure must be performed above 40°F (4°C). NOTE: One Step Primer must be used prior to any adhesive application to prevent glass displacement. Failure to do so may result in personal injury or property damage.
4. Apply 1214006 One Step Primer to encapsulated moldings if they are part of the bonding area.

Packaged in metal cartridges with 4-1/2" (114 mm) long screw-on Cone Nozzles included.

My Account
Create new Account
» Simplify Checkout
» View Order Status
» Save Shipping Info
» Track your Orders
Sign In to Your Account
Home |  About Us |  Terms and Conditions |  Return Policy |  Contact Us |  Product Catalog |  Account Login |  RMA Form |  Order Status |  Wishlist

Copyright ©2008 Gordon Glass Co. All Rights Reserved. Privacy Statement