16-gauge cold rolled steel.
Slotted Standards Allow for Shelf Height Adjustments in 1" (25 mm) Increments.
Use on Walls, Displays and Showcases.
Made in the USA.
KV 71 Series Standards compatible with
KV's 170 Series bracket, this
narrow standard works well in specialty applications where space is limited.
These standards allow for 1" vertical adjustability of brackets. The profile of
these standards are 5/16" wide by 13/32" deep.
KV Steel Standards and Brackets make building shelf units simple. They're so flexible, design
versatility is virtually limitless. Our Steel Standards and Brackets are all high quality, precision fitted pieces. They are easily assembled
and mounted, and work efficiently for most any shelving need. You get the advantages of both durable steel construction and a choice of finishes.
For decorative uses in display and showcases, and utility uses for storage applications.
Length: 72"
Color: Anochrome
Installation:
For maximum loading capacity, standards should be mounted directly to wall
studs, which are generally found at 16" intervals. (If
standards will not be mounted to studs, use appropriate wall anchors.) Use the
recommended fasteners (#6 head and #8 body x 1-1⁄2" screws) in all holes to
properly secure the standard. Prior to drilling all holes, check to be sure that
the standard is vertically level. Place the bracket into the standard slots.
Using a hammer handle or screwdriver handle, tap lightly near the bracket’s
base. The bracket will snap into place.