Available Locking and Non-Locking Models
Accepts 5/8" (16 mm) Throw Bolt
This CRL Dust Proof Locking Keeper with
Mounting Plate works with our 777S Door Rail Floor Lock and our AMR205A
Patch Lock. Accepts 15/32 inch (12 millimeter) plunger from these or similar
devices. Keeper is packed with two Flat Head Screws. Requires 1 inch (25
millimeters) diameter hole drilled 2 inches (51 millimeters) deep into floor.
Color: Brushed Nickel
Length of Mounting Plate: 2-7/8 in (73 mm)
Width of Mounting Plate: 1-3/8 in (35 mm)
Minimum Order: 1 Each
Fabrication Required:
One inch (25 millimeters) diameter hole drilled two inches (51 millimeters) deep
into floor and two holes for #10 screw anchors.
- Width of Mounting Plate: 1-3/8 in (35 mm)
- Length of Mounting Plate: 2-7/8 in (73 mm)
- Color: Brushed Nickel