Non-Skinning, High Quality, Gunnable Sealant
Will Not Harden or Lose Flexibility Under Adverse Conditions
40° to 120° F (4° to 49° C) Application Range
PTI 707 is a uniquely formulated non-skinning elastomeric sealant with a balance of adhesion-cohesion characteristics that enables it to perform in areas where dynamic conditions exist. PTI 707 does not harden or lose flexibility, adhesion, or elongation after prolonged exposure to high or low temperatures and ultraviolet light. Joint movement of up to plus or minus 12-1/2 percent will not affect the water-tightness of PTI 707.
Color: Bronze
Contents of Cartridge: 11 fl oz (325 ml)
Minimum Order: 1 Each
Additional Product Information:
It is recommended for glazing of glass, heel and toe beading, and complete channel bedding. Also recommended for use in metal-to-metal panel seals, perimeter seal around doors, windows, and masonry intersections; bedding for mullions, framed openings, and coping areas, curtain wall sealants, end dams and splice joints. PTI 707 has excellent adhesion to wood, metal, glass, concrete, and masonry surfaces.
Technical Data: Meets Federal Specification TT-S-001657, ASTM C-1085, AAMA 808.3 and Canadian Specification 19GPN. Comparable Sealants:
Tremco® Curtainwall Sealer
Adco® Curtainwall and Bedding Sealant
Important Note:
Not recommended for extended water immersion or interior applications. Tests should be run on special finishes to determine suitability. Check cartridge label and Specification Data Sheet for additional limitations.Not available for sale in the state of California.
*****WARNING!*****WARNING!*****WARNING!*****WARNING!*****WARNING!*****WARNING!
PRODUCT CANNOT SHIP VIA ANY TYPE OF AIR TRANSPORT, INCLUDING UPS NEXT DAY AIR,UPS 2ND DAY AIR, UPS 3 DAY SELECT, FEDERAL EXPRESS, PRIORITY MAIL, ETC.
THIS PRODUCT MUST SHIP VIA GROUND TRANSPORTATION ONLY!!!