Compact Design for Minimal Obstruction
Complete With Mounting Plate
Designed for ½” and ¾”(12 and 19 mm) Tempered
Glass Applications
Brushed or Polished Stainless Finishes Available
Designed for Wood or Steel Mounting Attachment
Our new Glass Rail Standoff Fittings can be used two ways to mount glass
up to ¾ inches (19 millimeter) thick. The Drill-Through Method will allow flush
mounting of the glass to the surface of the wallboard. The steel back plate can
also be fastened directly to steel supports, raising the glass off of the
surface.
This versatile Standoff Fitting features 2 inch (51 millimeter) diameter caps on
threaded bolts to secure the glass. The 2 inch (51 millimeter) diameter
Standoffs are fastened to a 3/8 inch (9.5 millimeter) thick stainless steel
plate that is pre-drilled for mounting.
Color:
Polished Stainless
Mounting Plate Height: 8 in. (203.2 mm)
Mounting Plate Width: 4 in. (101.6 mm)
Glass Fabrication: Two 3/4 in (19 mm) Diameter
Holes Per Fitting
Minimum Order: 1 Each
Important Note:
For Use With ½” or 3/4" (12 or 19 mm) Tempered Glass (Do not use with raw or
annealed glass). NOTE: Maximum Bracket Spacing is 24” (610 mm) on Center with
48” (1219 mm) Maximum Glass Panel Widths