For 5/16" to 1/2" (8 to 12 mm) Thick Glass
Mounts to Ceiling
Solid Brass
Assists With Shear Forces
Holds Glass Panels in Position While Sealant Cures
CRL Sleeve-Over Glass Clamps were designed
with two purposes in mind. The first is to provide a mechanical fastener to
assist with shear forces placed on the glass panels. The second is to provide a
securing clamp that would hold the glass panels in position while the sealant
applied in the joint cures (the silicone sealant glues the glass panels
together, prevents water leakage, and provides the pull strength to keep panels
from separating). Clamps are secured in place by a nylon tipped Allen screw.
Color: Brushed Nickel
Width: 1 in (25 mm)
Height: 3/4 in (19 mm)
Minimum Order: 1 Each
Important Note::
These Clamps are not designed to take the place of Headers
or a Support Bar.