These Pre-Cut Assemblies are a CRL Exclusive
Anti-Lift H-Bar and Lower Track Provide an Extra
Measure of Security
CRL supplies Security Anti-Lift Aluminum Extrusions for the fabrication of
Sliding Track Assemblies used in display showcases. They incorporate a design
that prevents lift-out, an extra measure of security when used with typical
Upper Channel and Ratchet or Plunger Type Locks. You can use them with 3/16 to
1/4 inch (5 to 6 millimeter) thick glass, and they are no more difficult to
install than normal, less secure track assemblies.
For your convenience, CRL has
provided ready-to- install Security Track Assemblies in pre-cut lengths of 36,
48, and 72 inch (914, 1219, and 1829 millimeter). These assemblies reduce your
labor, minimize excess material, and are shipped to you ready to install, with
all the required components included.
CRL Cat. No.TA30 End Caps for use with
Cat. No. S710A Security H-Bar can be ordered separately.
Color: Satin Anodized
Length: 36 in. (914 mm)
Minimum Order: 1 Each
Important Note:
NOTE: Maximum suggested panel size is 36" W x 48" H (914 x
1219 mm).