Home 0  Item(s)  $0.00 View Cart Order Status My Account About Us
Shop Products
Abrasive and Diamond Belts and Discs
Architectural and Ornamental Systems and Accessories
Automotive Products
CDS Saw Blades and Drill Bits for Concrete and Stone
Cerium Oxide Polishing Powder
Cleaning Products and Lubricants
Closet Doors and Drawer Hardware
Commercial Door and Window Hardware
Construction Sealants, Silicones Sealants, Glazing Tapes, Tools, and Adhesives
Convex, Dome Security and Inspection Mirrors
Corrosion Prevention and Protection
Craft, Hobby and Gift Ideas
Decorative Venetian Art Cast Glass Plates, Platters and Bowls
Displays, Catalogs, Videos, and Manuals
Door Closers and Accessories
Drill Bits for Marble, Granite, Porcelain, and Masonry
European Style Sliding and Pivot Glass Doors and Hardware
Extrusions, Channels, and Moldings
Glass Cabinet and Showcase Hardware
Glass Connectors and Clamps
Glass Shelf Kits, Supports, Clamps and Brackets
Glass, Plastic, Gasket, and Tube Cutting Tools, Fabrication Machinery, and Related Items
Glazing Knives, Points, Clips, Removers and Putty
Hand and Power Tools, Equipment, and Accessories
Makeup Mirrors, Vanity Mirrors, and Lamps
Mirror Frames, Mounting Hardware, Channels, and Supplies
Outlet Covers, Grills, and Accessories
Plastic and Rubber Tubing
Restaurant and Hospitality Products
Safety and Protective Wear and Equipment
Security Hardware
Showcase Assemblies, Parts, and Hardware
Shower and Tub Enclosure Hardware, Kits and Accessories
Showers, Vanities and Shower Columns by Dreamline
Soldering, Welding and Supplies
Standoffs, Display Systems and Hardware
Transaction and Commercial Hardware
UV Lamps, Dispensers, Kits, and Fast Curing Adhesives
Weatherstripping, Edge Seals, Trims and Glazing Vinyls
Window and Door Hardware
Window Film and Solar Screen

How to Install Heat Control, Privacy Frosted, Privacy Mirror, and Decorative Window Films

Heat Control, Privacy Frosted, Privacy Mirror, Privacy Rice Paper and Decorative Window Films Application Instructions.

RECOMMENDED TOOLS: (Sold Separately)
• Bottled water (not tap water)
• Spray bottle
• Squeegee or squeegee card
• Break-away utility knife (for cutting film)
• Single-edged razor blade (for cleaning glass)
• Ruler or tape measure
• Soft, lint-free cloth or paper coffee filters
• Transparent tape

Applying window film is a simple process, with only a few basic steps. Before beginning this project, please read the instructions completely and carefully.
Most residential window films are applied directly to the inside glass surface you can touch inside your home. If you have a removable storm pane, remove it and apply the film to the inside surface of the outermost window, then remount the storm pane.

REMINDER: ALL residential films are compatible with standard 1/8" clear residential windows. However, the Heat Control Insulating films are specifically engineered to be the most compatible with dual-pane (thermopane) and Low-E windows, whether 1/8" or 1/4" glass.
CAUTION: Do not apply residential films to plastic or Plexiglas surfaces or to motor vehicle windows. Do not apply any film to frosted, etched, leaded, cracked, holed, or deeply scratched glass, or glass that is very old (over 40 years).

• Handle the film very carefully. As with aluminum foil, once creased, the film will remain creased.
•Avoid using concentrated or degreasing detergents to make the Solution or the film may dry cloudy or fail to adhere.
•Larger windows (3-4' wide) usually are best filmed by two people working together to remove the liner, install, and trim the film. (See steps 3 and 5)
• Apply film anytime other than in direct sunlight (film may stick too quickly) or freezing weather (film will not stick at all). Best temperature is 45-90 F. Best time is early morning or late evening, when the glass is cooler.
•Work in a dust-free area. Turn off fans. Apply film to windows hung vertically. DO NOT lay windows down to film them or you will trap air bubbles under the film.
• For pre tinted glass, we recommend only Heat Control Insulating Platinum Gray Window Film with a 1/16" perimeter gap. For 1/4" thick plate-glass windows or Low-E windows, we recommend only Heat Control Insulating Window Films.
Measure the dimensions of your window carefully before unrolling and cutting the film. Film may be applied from side to side, or top to bottom from the kit roll.

Generously spray the window with the Solution. Then use your hand and squeegee to clean the windows thoroughly.
Re spray the glass, then use a razor blade to remove any caked dirt or paint. Use special care cleaning the corners.
Re-wet the window, then squeegee downward. Wipe off accumulated dirt from the window gasket with a soft cloth or paper coffee filters.

Unroll the film on a clean, flat surface near the window. Use a ruler as a guide and cut the film 1" larger than the dimensions of the window to be sure that the film will fit. Or, if you choose, pre trim the film to the final dimensions of each window (including the 1/16" gap).
Helpful Hint: We recommend pre trimming the film to final size for French panes, skylights, and arched windows.


Generously spray the Solution onto the inside surface of the window until beads of the soapy water run down the glass. If the window becomes dry, rewet it completely before applying film.

("the liner") (NOTE: Usually the liner is on the outside surface of the film roll.)
Remove the liner by attaching two pieces of transparent tape to the front and back surfaces of a corner of the film so that about 1" of tape is on the film, the rest centered and hanging over the pointed corner of the film. Press the two pieces of tape firmly together, then quickly pull them apart to begin separating the clear liner away from the adhesive side of the film.

Helpful Hint - This process may require a quick, snapping pull, much like pressing together and quickly pulling apart two pieces of velcro. As you carefully peel the liner away, generously spray the soapy solution onto the exposed adhesive. This spray helps break any static cling, reduces contamination, and makes the liner separation easier. Helpful Hint - Wet window film and place on window adhesive side out. This will hold the film while you remove the liner. Wet your hands with the Solution before handling the film to avoid leaving fingerprints on the adhesive. Small Windows Remove the liner diagonally, from one corner toward the opposing corner. Try to keep the film from touching itself. Large Windows and Patio Doors

Removing the liner from a large sheet (i.e. patio door size) involves two people. Your helper faces the window and holds the film perpendicular to the floor. You face the liner side of the film, separate the corner of the liner, slide your finger along the top edge of the film to fully separate the liner, then peel the liner down toward the floor in a smooth, even motion. After removing the liner completely, thoroughly spray the glass then the adhesive side of the film.

Completely remove the clear liner from the back of the film and thoroughly wet the exposed, dry adhesive surface. Be sure the window is dripping wet: too much Solution is better than not enough. Apply the adhesive side of the film to the wet glass. Start at the top of the window, then allow the film to gently lay down onto the glass. Handle the film carefully at the corners to avoid wrinkles or creases, which cannot be removed. Use your hands to smooth the film onto the glass. You can slide the film around and position it correctly while the window and film are thoroughly wet.

Spray the entire surface of the film facing you with the soapy Solution to lubricate its surface. Begin squeegeeing the water and air out from under the film. To do this, start about 2" from the top and side and squeegee from left to right. Second, to set the film on the glass, lightly squeegee the rest of the film downward, but leave the 2" perimeter area unsqueegeed. If you need to remove large air pockets, rewet the top of the film and squeegee again. If the squeegee drags, re spray the Solution on the top of the film.

Helpful Hint - Always wet film with the Solution before squeegeeing. You can remove any large bubbles by pushing them with the squeegee to the nearest film edge. Small bubbles (less than 1/8" in diameter) should disappear in a few days.)

Use a sharp razor blade or utility knife and a 1/16" wide guide to trim the film around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass and allows you to completely squeegee the water and air from under the film. Rewet the entire film surface and squeegee again. Press very firmly to remove all the water so that the adhesive can cure clearly.
This time, imagine an invisible line dividing the window from top to bottom. Starting at the top of the window, squeegee from the center to the left, then from the center to the right. Repeat this process until you reach the bottom of the window.

Helpful Hint - If your squeegee has a stiff blade, PUSH it toward the sides. If a flexible rubber blade, PULL the squeegee.

If "fingers" appear along any edge, wrap your squeegee with a few paper coffee filters (or soft, absorbent cloth) and carefully push the "fingers" toward the edge of the film. Hold in place to absorb any excess water. CURING TIME: The film begins to adhere in 30 minutes and fully "cures" over 4-8 days. Dry, sunny weather speeds curing; wet, cold weather prolongs it. During curing, the film may initially look hazy or cloudy; this effect will disappear with time and/or exposure to heat (i.e.. the sun or a hair dryer).

Always clean film with the same soapy Solution and a clean, pliable squeegee.
DO NOT USE ammonia, vinegar, household glass cleaners, paper towels, or brushes.

REMOVAL: Use GILA Window Film and Adhesive Removal Spray to remove old film more easily.

My Account
Create new Account
» Simplify Checkout
» View Order Status
» Save Shipping Info
» Track your Orders
Sign In to Your Account
Home |  About Us |  Terms and Conditions |  Return Policy |  Contact Us |  Product Catalog |  Account Login |  RMA Form |  Order Status |  Wishlist

Copyright ©2008 Gordon Glass Co. All Rights Reserved. Privacy Statement